Arctic Cat Prowler Forums: Prowler UTV Forum - View Single Post - Running 2 xtz throttle bodies instaed of 2 700's

Darryl89 · 11-17-2009, 09:19 AM

The throttle body assembly is p/n 0470-686 and has a MSRP of $397.79
The throttle cable is p/n 0487-066 and has a MSRP of $37.79
You would need to drill a second hole in the accelerator pedal mount to pass the 2nd cable through, then modify the pedal itself to hold the 2nd cable.
You might be able to use a 2nd intake plenum (p/n 0570-156 with MSRP of $58.49) also and just cap one end of both plenums to adapt the 2nd throttle body to.

Adubaz, can you post pics of how you adapted the TBs to the intake manifolds?

11-17-2009, 09:19 AM	#7 (permalink)
Darryl89 Founding Member Join Date: Oct 2008 Location: Farmington, NM Posts: 557	The throttle body assembly is p/n 0470-686 and has a MSRP of $397.79 The throttle cable is p/n 0487-066 and has a MSRP of $37.79 You would need to drill a second hole in the accelerator pedal mount to pass the 2nd cable through, then modify the pedal itself to hold the 2nd cable. You might be able to use a 2nd intake plenum (p/n 0570-156 with MSRP of $58.49) also and just cap one end of both plenums to adapt the 2nd throttle body to. Adubaz, can you post pics of how you adapted the TBs to the intake manifolds? __________________ Arctic Cat Prowler Desert Race XTZ: ITP BajaCross tires on ITP Beadlocks, Beard Super TZ Seats, Crowe 5pt harnesses, King Off-Road Racing Shocks, Custom Racing Chassis with 6.25inch longer wheelbase, Bionic Customs +5 Suspension set at 17.5inches travel, UTVCrap fabrication and bending, welding by Bionic Customs and more.... Looking for more sponsors...