over ride switch

[QuadGod]

I have found that the override button works when in diff lock in both forward and reverse. When climbing in the sand and wanting all 4 wheels pulling all the time I put it in diff lock and have replaced the stock override with an Arctic Cat on/off switch. There is no cut out at all when I have the switch turned on and it keeps from having to hold the stock one down all the time.

[hammerbike]

Originally Posted by Desertcat

Where you in 4 hi when you did this.

Nope, 2WD .

[BUDMAN]

it only works in 4wd rev.

[hammerbike]

I have checked mine a few times since and yup, it limits the top FORWARD (2wd or 4wd) speed on mine!
Weird eh?

[goonski]

It's funny, cause on my 09 xtx, the override only works in reverse in 4wd and I have never hit a rev limiter in 2wd, I've had mine up to 105kph with no rev limiter kicking in! Not complaining!

[Needspeed]

Originally Posted by QuadGod

I have found that the override button works when in diff lock in both forward and reverse. When climbing in the sand and wanting all 4 wheels pulling all the time I put it in diff lock and have replaced the stock override with an Arctic Cat on/off switch. There is no cut out at all when I have the switch turned on and it keeps from having to hold the stock one down all the time.

Thats my plan too, I took mine out in the snow and was a little irritated when I had to steer and hold down the by pass switch.

[hammerbike]

Originally Posted by goonski

It's funny, cause on my 09 xtx, the override only works in reverse in 4wd and I have never hit a rev limiter in 2wd, I've had mine up to 105kph with no rev limiter kicking in! Not complaining!

Well, obviously there's something wrong with yours!! LOL