Wiring Accessories - Arctic Cat Prowler Forums: Prowler UTV Forum
Arctic Cat Prowler Electrical Discussions Arctic Cat Prowler electrical discussions.
Lighting, audio, GPS, communications, etc.

LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 05-30-2019, 04:22 PM Thread Starter
New Member
Join Date: May 2019
Posts: 4
Wiring Accessories

Just purchased a new 2018 Prowler 500. I'll be adding some accessories in the next several weeks. First off will be a couple things in front....horn and light bar. I'll want to run the wires down to to battery area and also obviously in behind the dash(switches) like to follow the path of the factory wiring. I will be adding an accessory fuse block, ground block,and a breaker between the fuse block and battery. I'll also add relays for each accessory. Not going overboard on stuff just the regular. Horn,light bar,stereo, etc. I'm sure the fuses up in the front run down along the frame back to the battery? I suppose I should install the new fuse block back under the seat or should I put it up front??
I've done all this on my old Rhino and a couple friends but 8m not familiar with this Prowler. Any and all help will be appreciated! Than you up front!
#1CATMAN is offline  
Sponsored Links
post #2 of 3 (permalink) Old 05-31-2019, 05:08 AM
Bryan's Avatar
Join Date: Dec 2014
Location: Eastern most Iowa
Posts: 1,024
No relays are needed for a stereo, horn or light bar, they don't draw that many amps. I run a 5 amp fuse for my horn in the RZR. 15 amp fuse feeding my 42" light bar on the Prowler. A 20 amp fuse for the stereo in the RZR. A 20 amp fuse in the RZR feeding my rear LED's and location strobe. 10 amp fuse for the LED turn signals in the Prowler. Only relay I run is for the winch. I put both the fuse and ground blocks in the front of both the Prowler and RZR. Hope this helps ya!

'09 650XT H1, 72" Eagle Plow, Warn 3500 Winch. Dyna CDI box, UNI filters, A/C V-bag and console, EPI lift kit, Highlifter springs, Scat ProCar suspension seats. Rick the Rockets A frame and shock bushings. 28x12X14 Raceline Bruisers on Vision rims, on all corners. Cowling heat vents. Factory heat and defrost. RD's custom alternator kit. XTZ hood scoop and front shocks. Monster shock covers, turn signals. OEM glass sport windshield, sliding rear window, and lights, lights and more lights!
Bryan is offline  
post #3 of 3 (permalink) Old 06-01-2019, 01:09 PM Thread Starter
New Member
Join Date: May 2019
Posts: 4
Thanks for the feedback, I appreciate you taking the time!
#1CATMAN is offline  
Sponsored Links


Quick Reply

Register Now

In order to be able to post messages on the Arctic Cat Prowler Forums: Prowler UTV Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73