Fan not working (is there more fuses than under the seat) - Arctic Cat Prowler Forums: Prowler UTV Forum
Arctic Cat Prowler Electrical Discussions Arctic Cat Prowler electrical discussions.
Lighting, audio, GPS, communications, etc.

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 48 (permalink) Old 01-06-2012, 04:14 PM Thread Starter
Senior Member
 
sandy4bama's Avatar
 
Join Date: Mar 2010
Location: Pell City, Al.
Posts: 656
 
Fan not working (is there more fuses than under the seat)

Hey guys. Sorry for the absense I havn't been on in a while. I have a quick question if you guys could help. Went riding last weekend and noticed my fan is not working. I checked what fuses i seen under the seat but everything was fine. Is it on a relay instead of fuse? Is there another fuse box or other fuses i can check besides under the seat? I checked and didn't notice any wires or connections that have come unplugged. Any help would be greatly appreciated. Thanks guys.

ROLL TIDE ROLL!!!!


07 Prowler 650 H1 XT
3000lb. Warn winch
2" lift by Highlifter
30" Silverbacks on 14" SS112's
FMF Powercore exhaust
Dynatech CDI box
rejetted with Jets R Us OEM jets
stage 1&2 by ///AIRDAM
clocked secondary to B3
19 gram rollers (red)
2" snorkel by me
chrome skull shifter
LED tail lights in bed by me
fog lights
roof
custom doors by me
custom removable rear cage by me & friends
sandy4bama is offline  
Sponsored Links
Advertisement
 
post #2 of 48 (permalink) Old 01-06-2012, 05:53 PM
Jounior Member
 
Join Date: Dec 2010
Posts: 97
 
there is also a diode. the things in the fuse box with the arrows on them. if you pull it make sure to put it back the right direction. if put in backwords it wont work. have you checked for power on the fan?
mr. potato head is offline  
post #3 of 48 (permalink) Old 01-06-2012, 11:08 PM
Rides all the time
 
riddler28's Avatar
 
Join Date: Mar 2010
Location: alaska
Posts: 1,324
 
Run a hot and a ground to the fan to narrow down fan or wiring.
riddler28 is offline  
 
post #4 of 48 (permalink) Old 01-09-2012, 05:49 PM
Senior Member
 
soazcat's Avatar
 
Join Date: Oct 2009
Location: Willcox Az
Posts: 491
 
potato head is right . there is a fan diode. and a fuse. also make sure the wires and connection to the tempature sensor on the thermostat housing is ok and connected.
soazcat is offline  
post #5 of 48 (permalink) Old 01-11-2012, 11:56 AM
Junior Member
 
zticket's Avatar
 
Join Date: Feb 2009
Posts: 288
 
I had the same problem, and I could take out the relay clean off the connectors and replace it and it would work for a week but would not work again. When I returned from my trip I put in a new relay and put on a fan bypass switch so I am not for sure the relay was the problem but if not I can bypass the relay. On the bypass switch I bought one with a led light so now I can tell if the fan is comming on by watching the light on the switch, or it will work if I turn the switch on. I have a heat guage so I can tell what it is doing. It will not cool with the fan at slow speeds, I found that out on my last trip.
DON~~~
Here are some pictures of the heat gauge and the way I hooked it up.Fan not working (is there more fuses than under the seat)-gauge-panel.jpg

Fan not working (is there more fuses than under the seat)-arctic-cat-thermostat-housing.jpg
zticket is offline  
post #6 of 48 (permalink) Old 01-11-2012, 12:38 PM Thread Starter
Senior Member
 
sandy4bama's Avatar
 
Join Date: Mar 2010
Location: Pell City, Al.
Posts: 656
 
Thanx for all the input guys. Haven't had much time to investigate further but plan to this weekend. zticket, very nice on the gauge install....clean.

ROLL TIDE ROLL!!!!


07 Prowler 650 H1 XT
3000lb. Warn winch
2" lift by Highlifter
30" Silverbacks on 14" SS112's
FMF Powercore exhaust
Dynatech CDI box
rejetted with Jets R Us OEM jets
stage 1&2 by ///AIRDAM
clocked secondary to B3
19 gram rollers (red)
2" snorkel by me
chrome skull shifter
LED tail lights in bed by me
fog lights
roof
custom doors by me
custom removable rear cage by me & friends
sandy4bama is offline  
post #7 of 48 (permalink) Old 01-12-2012, 04:14 AM
Senior Member
 
Diesel Racer's Avatar
 
Join Date: Dec 2010
Location: NH
Posts: 799
 
How much room is in the bottom of that housing, I was thinking the same thing and wasn't sure if the t-stat went all the way to the bottom.



Tim

2010 A/C XTZ with some "Stuff" SOLD
But still here everyday to contribute to the cause
Diesel Racer is offline  
post #8 of 48 (permalink) Old 01-12-2012, 02:07 PM
Junior Member
 
zticket's Avatar
 
Join Date: Feb 2009
Posts: 288
 
Quote:
Originally Posted by Diesel Racer View Post
How much room is in the bottom of that housing, I was thinking the same thing and wasn't sure if the t-stat went all the way to the bottom.
I measured it and I had a small amount to spare. I used the sender that came with the auto meter gauge. It works great. Make sure you ground the t-stat housing because it is not grounded because it has rubber on both sides.
DON~~~
zticket is offline  
post #9 of 48 (permalink) Old 01-12-2012, 11:33 PM
Rides all the time
 
riddler28's Avatar
 
Join Date: Mar 2010
Location: alaska
Posts: 1,324
 
I used that same spot on mine for the feed line to my cab heater.
riddler28 is offline  
post #10 of 48 (permalink) Old 01-13-2012, 08:03 AM
Junior Member
 
zticket's Avatar
 
Join Date: Feb 2009
Posts: 288
 
I bet the motor helps to keep you warm also.
DON~~~
zticket is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Arctic Cat Prowler Forums: Prowler UTV Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome
 


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61