Join Date: Mar 2012
Location: Kingman, AZ 86409
I added some addition strength to the floorpan. I stepped on the center of the pan, and it buckled in the middle. I added angle brackets at the front of the seat release mount. also made a piece of diamond plate aluminum to cover the floor, and firewall juncture. Two other pieces were added for the upright areas on both sides. Glad I pulled it down as I found oil in the belt area while changing clutch rollers! Anybody replace the seal, and fixed plate spacer? Thanks
2009 700EFI XTX, , AC Winch, 2010 Dust Shield EPI Sport Utility Clutch Kit , Street Legal, Cage chopped 2 ", Aluminum Diamond Plate Trim, Relocated Factory Bladders with covers, 5 Pt. Harness installed, Bed Tiedown System, Scat Pro-Car Seats, Secondary Battery installed, Oil Pressure, Oil/CVT Temperature, Volt Meter & Water Temp Gauges installed with Dash Plate, Bighorns, ITP Black 212 Wheels. Tonneau cover. 750 Big Bore Kit, Web Cam, and Rocker Arms.
Either - Dick or RD
Last edited by Fairmont79; 12-24-2013 at 06:44 AM.