Join Date: Aug 2009
Location: Woodward County, Oklahoma
Correct! The Service Manual, Sec 8-9 says:
I believe it is supposed to be 1/4 inch outwards \---/
NOTE: All measurements and adjustments must
be made with the vehicle unloaded.
Mark the center-line of the front tires at the front and record the distance between the marks at the front and
rear of the tire; then using a tape measure, measure and
rear. The front measurement should be 6-12 mm
(1/4-1/2 in.) greater than the rear measurement
2009 Prowler XTZ 1000 Baja - ITP beadlock wheels, ITP Baja Cross X/D tires, 2" wheel spacers, harness bar, 5 point harnesses, custom doors, 4 Vision X LED lights, 2 PIAA lights, RAM mounts on roll bar and dash, military truck mirrors, polished aluminum rear frame brace, inside tube rear frame stiffeners, Mossy Oak camo pattern seats, custom front brush guard, parking brake 'on' alarm, Throttlemaxx controller, Uni pre-filter, and Mobil 1 4T M/C 10W-40 racing oil with K&N filter.