EFI Fuel pumps - Arctic Cat Prowler Forums: Prowler UTV Forum
Arctic Cat Prowler General Discussions General discussions pertaining to the Arctic Cat Prowler.

 3Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 12 (permalink) Old 12-14-2015, 05:41 AM Thread Starter
Administrator
 
Fairmont79's Avatar
 
Join Date: Mar 2012
Location: Kingman, AZ 86409
Posts: 7,109
 
EFI Fuel pumps

Just a heads up: I ran across EFI Fuel pumps on Ebay AC# 0570-272 for less than 50.00 USD. Factory cost was listed at 450.00 plus! Direct replacement pump.

2009 700EFI XTX, , AC Winch, 2010 Dust Shield EPI Sport Utility Clutch Kit , Street Legal, Cage chopped 2 ", Aluminum Diamond Plate Trim, Relocated Factory Bladders with covers, 5 Pt. Harness installed, Bed Tiedown System, Scat Pro-Car Seats, Secondary Battery installed, Oil Pressure, Oil/CVT Temperature, Volt Meter & Water Temp Gauges installed with Dash Plate, Bighorns, ITP Black 212 Wheels. Tonneau cover. 750 Big Bore Kit, Web Cam, and Rocker Arms.

Either - Dick or RD
Fairmont79 is offline  
Sponsored Links
Advertisement
 
post #2 of 12 (permalink) Old 12-14-2015, 06:07 AM
de3
Loyal Member
 
de3's Avatar
 
Join Date: Mar 2012
Location: parkersburg wva
Posts: 8,040
 
Quote:
Originally Posted by Fairmont79 View Post
Just a heads up: I ran across EFI Fuel pumps on Ebay AC# 0570-272 for less than 50.00 USD. Factory cost was listed at 450.00 plus! Direct replacement pump.
sounds like a good time to buy one at that price//////

2015 A/C Sport,With a few add ons..........
de3 is offline  
post #3 of 12 (permalink) Old 12-14-2015, 09:19 AM Thread Starter
Administrator
 
Fairmont79's Avatar
 
Join Date: Mar 2012
Location: Kingman, AZ 86409
Posts: 7,109
 
Ordered one for myself! Had a bare spot on my shelf! LOL
de3 likes this.

2009 700EFI XTX, , AC Winch, 2010 Dust Shield EPI Sport Utility Clutch Kit , Street Legal, Cage chopped 2 ", Aluminum Diamond Plate Trim, Relocated Factory Bladders with covers, 5 Pt. Harness installed, Bed Tiedown System, Scat Pro-Car Seats, Secondary Battery installed, Oil Pressure, Oil/CVT Temperature, Volt Meter & Water Temp Gauges installed with Dash Plate, Bighorns, ITP Black 212 Wheels. Tonneau cover. 750 Big Bore Kit, Web Cam, and Rocker Arms.

Either - Dick or RD
Fairmont79 is offline  
 
post #4 of 12 (permalink) Old 12-22-2015, 09:09 AM Thread Starter
Administrator
 
Fairmont79's Avatar
 
Join Date: Mar 2012
Location: Kingman, AZ 86409
Posts: 7,109
 
New pump arrived! It is not a complete assembly like AC offers, but just the electric pump! For the difference in price, it is impossible to beat! Prowler is running top notch! LTE exhaust is quiet for the street, and simple to switch over for trail/offroad use! Just finished up my roof scoop (built the first one to try it out!), second one is more detailed! Looking at alternator setups for 550/650/700 Prowlers XT, XTX, and the HDX. The XTX looks promising also, but need to find one to look at! Anybody with pictures of the front engine area of the XTZ please let me know! Plan on building one offs after the holidays!
de3 likes this.

2009 700EFI XTX, , AC Winch, 2010 Dust Shield EPI Sport Utility Clutch Kit , Street Legal, Cage chopped 2 ", Aluminum Diamond Plate Trim, Relocated Factory Bladders with covers, 5 Pt. Harness installed, Bed Tiedown System, Scat Pro-Car Seats, Secondary Battery installed, Oil Pressure, Oil/CVT Temperature, Volt Meter & Water Temp Gauges installed with Dash Plate, Bighorns, ITP Black 212 Wheels. Tonneau cover. 750 Big Bore Kit, Web Cam, and Rocker Arms.

Either - Dick or RD
Fairmont79 is offline  
post #5 of 12 (permalink) Old 12-27-2015, 02:31 AM
Senior Member
 
Diesel Racer's Avatar
 
Join Date: Dec 2010
Location: NH
Posts: 799
 
I will shoot ya a pic of the XTZ when I get the cover off again but there isn't really any room there.



Tim

2010 A/C XTZ with some "Stuff" SOLD
But still here everyday to contribute to the cause
Diesel Racer is offline  
post #6 of 12 (permalink) Old 12-27-2015, 06:10 AM Thread Starter
Administrator
 
Fairmont79's Avatar
 
Join Date: Mar 2012
Location: Kingman, AZ 86409
Posts: 7,109
 
I looked at that area, decided the back side of the engine offers more promise! Damn they packed them tight!

2009 700EFI XTX, , AC Winch, 2010 Dust Shield EPI Sport Utility Clutch Kit , Street Legal, Cage chopped 2 ", Aluminum Diamond Plate Trim, Relocated Factory Bladders with covers, 5 Pt. Harness installed, Bed Tiedown System, Scat Pro-Car Seats, Secondary Battery installed, Oil Pressure, Oil/CVT Temperature, Volt Meter & Water Temp Gauges installed with Dash Plate, Bighorns, ITP Black 212 Wheels. Tonneau cover. 750 Big Bore Kit, Web Cam, and Rocker Arms.

Either - Dick or RD
Fairmont79 is offline  
post #7 of 12 (permalink) Old 12-27-2015, 09:23 AM
Loyal Member
 
GTroyer's Avatar
 
Join Date: Nov 2009
Location: Reno/Sparks ,Nv.
Posts: 3,289
 
yup we don't have much working room in them .

name is Gary or hey you if ya forget

2009 Prowler XTZ , couple things added here and there
'83 CJ7 / SBC + whole lot added here and there
'01 Dodge / Cummins / Dually, a ton of stuff added here and there

INSTRUCTIONS FOR THE NEWBIES ...
1. Bring in a good load of firewood for the pit
2. start the morning coffee , strong but not burnt / boiled down , IMPORTANT start it early as many of us old farts get up early !!
3. sit a spell and swap some lies with the best of us
GTroyer is offline  
post #8 of 12 (permalink) Old 12-27-2015, 10:33 AM Thread Starter
Administrator
 
Fairmont79's Avatar
 
Join Date: Mar 2012
Location: Kingman, AZ 86409
Posts: 7,109
 
Must be a pain to work on!

2009 700EFI XTX, , AC Winch, 2010 Dust Shield EPI Sport Utility Clutch Kit , Street Legal, Cage chopped 2 ", Aluminum Diamond Plate Trim, Relocated Factory Bladders with covers, 5 Pt. Harness installed, Bed Tiedown System, Scat Pro-Car Seats, Secondary Battery installed, Oil Pressure, Oil/CVT Temperature, Volt Meter & Water Temp Gauges installed with Dash Plate, Bighorns, ITP Black 212 Wheels. Tonneau cover. 750 Big Bore Kit, Web Cam, and Rocker Arms.

Either - Dick or RD
Fairmont79 is offline  
post #9 of 12 (permalink) Old 12-28-2015, 02:25 AM
Senior Member
 
Diesel Racer's Avatar
 
Join Date: Dec 2010
Location: NH
Posts: 799
 
Yes it is, I need to figure a mounting spot as my Muzzy's are in the way so it will be creative thinking in this one.



Tim

2010 A/C XTZ with some "Stuff" SOLD
But still here everyday to contribute to the cause
Diesel Racer is offline  
post #10 of 12 (permalink) Old 12-28-2015, 04:06 AM Thread Starter
Administrator
 
Fairmont79's Avatar
 
Join Date: Mar 2012
Location: Kingman, AZ 86409
Posts: 7,109
 
I'm thinking driver side off the engine flange, alternator would tuck under the seat frame. I have a flange ordered to machine the pulley to fit it, and longer bolts.

2009 700EFI XTX, , AC Winch, 2010 Dust Shield EPI Sport Utility Clutch Kit , Street Legal, Cage chopped 2 ", Aluminum Diamond Plate Trim, Relocated Factory Bladders with covers, 5 Pt. Harness installed, Bed Tiedown System, Scat Pro-Car Seats, Secondary Battery installed, Oil Pressure, Oil/CVT Temperature, Volt Meter & Water Temp Gauges installed with Dash Plate, Bighorns, ITP Black 212 Wheels. Tonneau cover. 750 Big Bore Kit, Web Cam, and Rocker Arms.

Either - Dick or RD
Fairmont79 is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Arctic Cat Prowler Forums: Prowler UTV Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome
 


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73