Join Date: Mar 2012
Location: Kingman, AZ 86409
I had trace amounts of oil in the stator, looking at how it was assembled, and the crank bearing is open to the flywheel, and magneto. The only seal I found is on the cover, My is a 700 and the seal is held in by a plate with 3 screws. The way the cases are made, I don't see how there would not be any oil present. From what I see, isn't your oil fill bolted on the cover?
2009 700EFI XTX, , AC Winch, 2010 Dust Shield EPI Sport Utility Clutch Kit , Street Legal, Cage chopped 2 ", Aluminum Diamond Plate Trim, Relocated Factory Bladders with covers, 5 Pt. Harness installed, Bed Tiedown System, Scat Pro-Car Seats, Secondary Battery installed, Oil Pressure, Oil/CVT Temperature, Volt Meter & Water Temp Gauges installed with Dash Plate, Bighorns, ITP Black 212 Wheels. Tonneau cover. 750 Big Bore Kit, Web Cam, and Rocker Arms.
Either - Dick or RD