Join Date: Mar 2012
Location: Kingman, AZ 86409
I used the ScatProCar seats on mine, but I have a XTX. The Scat web site gives all of their seat model measurements. I used the stock mounting plate, then used the stock mounting plate with the sliders, then I settled on my own plate (3/16" aluminum). The aluminum plate lowered the seat 3/4". They are a snug fit in the Prowler! The seat shown is their extreme series.
2009 700EFI XTX, , AC Winch, 2010 Dust Shield EPI Sport Utility Clutch Kit , Street Legal, Cage chopped 2 ", Aluminum Diamond Plate Trim, Relocated Factory Bladders with covers, 5 Pt. Harness installed, Bed Tiedown System, Scat Pro-Car Seats, Secondary Battery installed, Oil Pressure, Oil/CVT Temperature, Volt Meter & Water Temp Gauges installed with Dash Plate, Bighorns, ITP Black 212 Wheels. Tonneau cover. 750 Big Bore Kit, Web Cam, and Rocker Arms.
Either - Dick or RD