Arctic Cat 2007 H1 - Arctic Cat Prowler Forums: Prowler UTV Forum
Arctic Cat Prowler General Discussions General discussions pertaining to the Arctic Cat Prowler.

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 15 (permalink) Old 10-11-2010, 03:44 PM Thread Starter
Junior Member
 
Join Date: Oct 2010
Posts: 6
 
Arctic Cat 2007 H1

I have an Arctic Cat Prowler 2007 H1 Red, im having some problems i cant understand, when i start the engine and drive every thing works grate, after like 5 - 10 minutes of driving the Letter 'D' (On the Screen that shows D/N/R/L) replaces with the letter 'E'.
At that point, when im accelerating, its stop accelerate at 35 RPM exactly and it wont go faster oh higher in the RPM.
If ill put it in Nutral after it get stuck on 35RPM every thing will go well and it wont get stuck, but then when ill put it again in D it will show me the letter 'E' and will get stuck at 35 RPM.

*When i say 35 RPM i mean (of course) 35 as showen at the gauge when i
program it to show RPM's.

I dont know what to do, i dont have even a clue about what could cause such a problam.

*If i post it at the wrong forum, please currect me, i'm new to here.
omerbenzvi is offline  
Sponsored Links
Advertisement
 
post #2 of 15 (permalink) Old 10-11-2010, 09:29 PM
Loyal Member
 
sandchris's Avatar
 
Join Date: Oct 2008
Location: PEORIA,AZ
Posts: 3,564
 
Welcome to the site. You are on the right forum. So are you saying it is only revving to 3500 rpm or that is what the tach is showing? The E is error that is coming on the display.



Never pay again for live sex! | Hot girls doing naughty stuff for free! | Chat for free!
sandchris is offline  
post #3 of 15 (permalink) Old 10-11-2010, 09:33 PM
Senior Member
 
sandy4bama's Avatar
 
Join Date: Mar 2010
Location: Pell City, Al.
Posts: 656
 
Mine done this only a time or two. Check and make sure you've got it in gear real good. If your linkage is off it might not be going into gear all the way causing the error and not letting it rev up and go.

ROLL TIDE ROLL!!!!


07 Prowler 650 H1 XT
3000lb. Warn winch
2" lift by Highlifter
30" Silverbacks on 14" SS112's
FMF Powercore exhaust
Dynatech CDI box
rejetted with Jets R Us OEM jets
stage 1&2 by ///AIRDAM
clocked secondary to B3
19 gram rollers (red)
2" snorkel by me
chrome skull shifter
LED tail lights in bed by me
fog lights
roof
custom doors by me
custom removable rear cage by me & friends
sandy4bama is offline  
 
post #4 of 15 (permalink) Old 10-11-2010, 11:46 PM
Rides all the time
 
riddler28's Avatar
 
Join Date: Mar 2010
Location: alaska
Posts: 1,324
 
The trans is not reading the gear correctly. You will need to adjust the shifter linkage. I was having the same problem and alittle time messing with the adjuster to get the pin in and out smoothly in all gears and your problem will go away.

Good luck and welcome to the site. Great first post question.
riddler28 is offline  
post #5 of 15 (permalink) Old 10-12-2010, 01:35 PM Thread Starter
Junior Member
 
Join Date: Oct 2010
Posts: 6
 
..

I have tryed to adjust the linkage, still same error, i dont get it, every thing seems to be fine and then its just cant get into 'H', its just shows that 'E', even if ill stop and start to messup with it, but when i let it "rest" for something like half an hour its stops doing it, but then after like5 - 10 minutes its starts all over again.
omerbenzvi is offline  
post #6 of 15 (permalink) Old 10-12-2010, 05:14 PM
Jounior Member
 
sneaky snake's Avatar
 
Join Date: Oct 2009
Location: west virginia
Posts: 291
 
Welcome to the site

2009 700 xtx
alum skid plates (fabrication by me)
rear bumper (fabrication by me)
front brush gard (fabrication by me)
beard seats
crow harnes (4 point)
lower tail light
epi clutch kit
soft top
full wind sheild
e brake alarm (utv crap)
horn
sound proof engine cover
warn winch
trail armor doors
rear sound bar
stage 1,2&3 clutch work by ///AIRDAM
Stock roll cage lowered 3"
sneaky snake is offline  
post #7 of 15 (permalink) Old 10-12-2010, 05:29 PM
Loyal Member
 
flying121's Avatar
 
Join Date: Mar 2009
Posts: 2,390
 
Welcome aboard.
flying121 is offline  
post #8 of 15 (permalink) Old 10-12-2010, 08:30 PM
Senior Member
 
sandy4bama's Avatar
 
Join Date: Mar 2010
Location: Pell City, Al.
Posts: 656
 
Quote:
Originally Posted by omerbenzvi View Post
I have tryed to adjust the linkage, still same error, i dont get it, every thing seems to be fine and then its just cant get into 'H', its just shows that 'E', even if ill stop and start to messup with it, but when i let it "rest" for something like half an hour its stops doing it, but then after like5 - 10 minutes its starts all over again.
After adjusting your linkage did you make sure your engine cover was reinstalled properly. I know it sounds like a dumb question but mine wasn't on right one time and put pressure on the shifter causing this problem too.

ROLL TIDE ROLL!!!!


07 Prowler 650 H1 XT
3000lb. Warn winch
2" lift by Highlifter
30" Silverbacks on 14" SS112's
FMF Powercore exhaust
Dynatech CDI box
rejetted with Jets R Us OEM jets
stage 1&2 by ///AIRDAM
clocked secondary to B3
19 gram rollers (red)
2" snorkel by me
chrome skull shifter
LED tail lights in bed by me
fog lights
roof
custom doors by me
custom removable rear cage by me & friends
sandy4bama is offline  
post #9 of 15 (permalink) Old 10-26-2010, 06:55 AM Thread Starter
Junior Member
 
Join Date: Oct 2010
Posts: 6
 
Can someone upload a picture of the part that needed to be adjusted? I'm a bit confused.. ):
omerbenzvi is offline  
post #10 of 15 (permalink) Old 11-08-2010, 10:43 AM Thread Starter
Junior Member
 
Join Date: Oct 2010
Posts: 6
 
So .. i have removed the shifter linkage so it will be only on the 'H' gear, i drove it for 10 minutes (6000 RPM Max) and then its suddenly drops to 3500 and wont move even a bit further, So i can tel its for sure not the Shifter Linkage, its not the Air filter, not the coil or spark plug.
bloody hell what could it be?!

I must mention that the engine sounds and works perfectly in neutral. (wtf?o_O)

Last edited by omerbenzvi; 11-08-2010 at 02:46 PM.
omerbenzvi is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Arctic Cat Prowler Forums: Prowler UTV Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome
 


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61