Join Date: Apr 2009
Location: Waddell/Surprise. AZ
As long as it tilts a couple of inches I would be good with that. I put T.S.Aggressor buckets in my stock caged xtz and could use tilt. Was thinking of ordering the assy from Babbits.
Well I would say dont do it as a retired Ford tech, AC did a poor job trying to copy an early Ford tilt design and so they wouldnt get into trouble did a poor job of it (sorry Arctic Cat) Mine has been replaced once and it is terrible too much slop in the tilt and the coupler for the steering shaft it makes all kinds of noise driving down the trail and you can feel the banging in the steering wheel as you drive,I love my Prowler but I have to say I cant stand thr tilt wheel ,and my seats are higher than the stock seats too. Im getting ready to buy a non tilt assembly for mine. Just my thoughts on it.
2009 Prowler 700 XTX Walker Evans Shocks,STI Roctane 27/9/14 and 27/11/14 tires,Warn skid plates,Ridgid Ind Prerunner Cage,Home made spare tire carrier,Hids high and low beams,1.5 inch wheel spacers,E Brake Alarm, Rear diff vent mod Etc. NO TURF SAVER!