Join Date: Mar 2012
Location: Kingman, AZ 86409
I've been wiring my gauges, and changing the grounds. About 3 years ago when I was wiring my car, I ran across a Butane Soldering Iron at Radio Shack. This tool is great on # 10 wire and smaller. I picked up the solder at the Shack also, very fine solder with a flux core. I also installed a lite for the switch panel (motorcycle license plate lite). The first picture is the light, 2nd is the soldering iron, the remainder are the additional ground points. The bolt through the floorboard is a grounder stud for any future needs. RD
2009 700EFI XTX, , AC Winch, 2010 Dust Shield EPI Sport Utility Clutch Kit , Street Legal, Cage chopped 2 ", Aluminum Diamond Plate Trim, Relocated Factory Bladders with covers, 5 Pt. Harness installed, Bed Tiedown System, Scat Pro-Car Seats, Secondary Battery installed, Oil Pressure, Oil/CVT Temperature, Volt Meter & Water Temp Gauges installed with Dash Plate, Bighorns, ITP Black 212 Wheels. Tonneau cover. 750 Big Bore Kit, Web Cam, and Rocker Arms.
Either - Dick or RD