Junior Member
Join Date: Feb 2010
Location: Loreto, Baja California Sur
Posts: 100
![]() | ![]() |
Arctic Cat Prowler General Discussions General discussions pertaining to the Arctic Cat Prowler. |
Page 1 of 2 | 1 | 2 |
|
LinkBack | Thread Tools | Display Modes |
Sponsored Links | |||
Advertisement
|
|
|
|
1. Clock/Engine Hour Meter - The clock function
indicates time in the 12 hour mode; the hour
meter indicates the total time the vehicle has run
and cannot be reset to zero. To set the clock, use
the following procedure.
A.With the ignition switch in the ON position,
press and release the Mode Button (3) until
the Clock/Engine Hour Meter (1) is displayed;
then (if necessary) press and release
the Set/Reset Button (4) to the clock display.
B. Press and hold the Set/Reset Button (4) until NOTE: Approximately two seconds after releasing
the minutes stop scrolling and the hour display
starts to scroll. Momentarily release
when the correct hour is displayed; then
repeatedly press and release the Set/Reset
Button (4) until the correct minutes are displayed.
5. Odometer/Trip Meter (#1 and #2) - Odometer NOTE: To select the odometer (ODO), trip #1
registers the total distance the vehicle has traveled.
Trip meters can register two distances (for
instance, #1 could register trip distance and #2
could register distance between stops). The trip
meters can be reset while the odometer only registers
accumulated miles/kilometers.
Sponsored Links | |
Advertisement
|
|
|
Bookmarks |
Thread Tools | |
Show Printable Version Show Printable Version
Email this Page Email this Page
|
|
Display Modes | |
|
Posting Rules | |