Welcome aboard airrbob!
You are in luck. I had to deal with this a while back and was able to figure it out. The fittings that slide onto the fuel rail are made by Dorman products. The part that Arctic Cat uses is the same part that Ford used for their inline fuel filters on certain model cars and trucks. The used the Dorman fitting and the Ford clip. You can get them at Napa Auto and the part number is 730-6675. They are the 5/16 Ford Fuel Line connector clips and they come in a pack of 5 for about $7.00. If you need the fittings that slide onto the rail you can get them from Napa, Car Quest, Pep Boys, Checker, or Autozone. They have straight, 45 and 90 degree fittings and they are made by Dorman products.
Do they look like these?
Last edited by flying121; 12-31-2010 at 10:08 PM.