clutch trouble - Arctic Cat Prowler Forums: Prowler UTV Forum
Northeast Region The Northeast Region includes the following States:

Connecticut, Delaware, Maine, Maryland, Massachusetts, New Hampshire, New Jersey, New York, Pennsylvania, Rhode Island, and Vermont.

 1Likes
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 13 (permalink) Old 10-29-2015, 08:18 PM Thread Starter
Junior Member
 
Join Date: Oct 2015
Posts: 4
 
clutch trouble

hello I have a 2008 prowler 700 xtx and I had to change the seal on the primary shaft due to oil filled clutches and belt, so I have changed the seal the fixed drive spacer and cleaned everything up real good and put it back together, I have only gotten roughly 20 miles on it since and I have more oil in there? what could I have done wrong? any suggestions?
cat king is offline  
Sponsored Links
Advertisement
 
post #2 of 13 (permalink) Old 10-30-2015, 03:46 AM
Administrator
 
Fairmont79's Avatar
 
Join Date: Mar 2012
Location: Kingman, AZ 86409
Posts: 7,079
 
Welcome to the forum! Best site by far! That seal is temperamental to install, very easy to distort. I had the same thing happen. I used a seal installer and a hammer to put one in, since then I've pressed all of mine in after the first one leaked. Also did you change the O-Ring, and inner seal? Just curious on those. Pain in the butt to do!

2009 700EFI XTX, , AC Winch, 2010 Dust Shield EPI Sport Utility Clutch Kit , Street Legal, Cage chopped 2 ", Aluminum Diamond Plate Trim, Relocated Factory Bladders with covers, 5 Pt. Harness installed, Bed Tiedown System, Scat Pro-Car Seats, Secondary Battery installed, Oil Pressure, Oil/CVT Temperature, Volt Meter & Water Temp Gauges installed with Dash Plate, Bighorns, ITP Black 212 Wheels. Tonneau cover. 750 Big Bore Kit, Web Cam, and Rocker Arms.

Either - Dick or RD
Fairmont79 is offline  
post #3 of 13 (permalink) Old 10-30-2015, 08:20 AM
Loyal Member
 
GTroyer's Avatar
 
Join Date: Nov 2009
Location: Reno/Sparks ,Nv.
Posts: 3,277
 
welcome to the house also

please fill in location and signature lines helps later down the road when you ask a question .. we won't have to ask a question to answer yours .. also gives a clue as to ride area and might help us to recommend a parts supplier or repair place near you. BLA BLA BLA you get the idea.

tradition is the new guy gets to brew the morning coffee and bring in a load of wood for the fire pit ... so again welcome and sit a spell , swap a few lies and have a brew with us.

name is Gary or hey you if ya forget

2009 Prowler XTZ , couple things added here and there
'83 CJ7 / SBC + whole lot added here and there
'01 Dodge / Cummins / Dually, a ton of stuff added here and there

INSTRUCTIONS FOR THE NEWBIES ...
1. Bring in a good load of firewood for the pit
2. start the morning coffee , strong but not burnt / boiled down , IMPORTANT start it early as many of us old farts get up early !!
3. sit a spell and swap some lies with the best of us
GTroyer is offline  
 
post #4 of 13 (permalink) Old 10-30-2015, 09:38 AM
Administrator
 
Fairmont79's Avatar
 
Join Date: Mar 2012
Location: Kingman, AZ 86409
Posts: 7,079
 
I keep forgetting about the coffee protocol!!!!!!!!!!!!!!!!!!!! LOL

2009 700EFI XTX, , AC Winch, 2010 Dust Shield EPI Sport Utility Clutch Kit , Street Legal, Cage chopped 2 ", Aluminum Diamond Plate Trim, Relocated Factory Bladders with covers, 5 Pt. Harness installed, Bed Tiedown System, Scat Pro-Car Seats, Secondary Battery installed, Oil Pressure, Oil/CVT Temperature, Volt Meter & Water Temp Gauges installed with Dash Plate, Bighorns, ITP Black 212 Wheels. Tonneau cover. 750 Big Bore Kit, Web Cam, and Rocker Arms.

Either - Dick or RD
Fairmont79 is offline  
post #5 of 13 (permalink) Old 10-30-2015, 11:47 AM
Loyal Member
 
GTroyer's Avatar
 
Join Date: Nov 2009
Location: Reno/Sparks ,Nv.
Posts: 3,277
 
Quote:
Originally Posted by Fairmont79 View Post
I keep forgetting about the coffee protocol!!!!!!!!!!!!!!!!!!!! LOL
coffee is cheeper than a fifth or two of old single malt

name is Gary or hey you if ya forget

2009 Prowler XTZ , couple things added here and there
'83 CJ7 / SBC + whole lot added here and there
'01 Dodge / Cummins / Dually, a ton of stuff added here and there

INSTRUCTIONS FOR THE NEWBIES ...
1. Bring in a good load of firewood for the pit
2. start the morning coffee , strong but not burnt / boiled down , IMPORTANT start it early as many of us old farts get up early !!
3. sit a spell and swap some lies with the best of us
GTroyer is offline  
post #6 of 13 (permalink) Old 10-30-2015, 01:36 PM
Administrator
 
Fairmont79's Avatar
 
Join Date: Mar 2012
Location: Kingman, AZ 86409
Posts: 7,079
 
10-4 on that! But not as good!

2009 700EFI XTX, , AC Winch, 2010 Dust Shield EPI Sport Utility Clutch Kit , Street Legal, Cage chopped 2 ", Aluminum Diamond Plate Trim, Relocated Factory Bladders with covers, 5 Pt. Harness installed, Bed Tiedown System, Scat Pro-Car Seats, Secondary Battery installed, Oil Pressure, Oil/CVT Temperature, Volt Meter & Water Temp Gauges installed with Dash Plate, Bighorns, ITP Black 212 Wheels. Tonneau cover. 750 Big Bore Kit, Web Cam, and Rocker Arms.

Either - Dick or RD
Fairmont79 is offline  
post #7 of 13 (permalink) Old 10-30-2015, 10:37 PM Thread Starter
Junior Member
 
Join Date: Oct 2015
Posts: 4
 
Haha I'm still figuring stuff out on this whole forum business, and thanks for the feedback and welcoming but I pressed the seal in and I did forget to put the o ring in the spacer.. Dumb mistake but I never did change the inner seal and I did notice when I first put the spacer in I don't believe the holes were lined up very good, but I will see the outcome by tomorrow as I'm trying to restore the belt of it being oil soaked..
cat king is offline  
post #8 of 13 (permalink) Old 10-31-2015, 03:26 AM
Administrator
 
Fairmont79's Avatar
 
Join Date: Mar 2012
Location: Kingman, AZ 86409
Posts: 7,079
 
I noticed the mismatch on the holes too! Not sure it matters. I use tide laundry soap to clean oil off my belts, scrub the heck out of it, and let it air dry. Just keep coming back, the forum will provide you with everything for your Prowler, Hell we will even help you spend money! LOL

2009 700EFI XTX, , AC Winch, 2010 Dust Shield EPI Sport Utility Clutch Kit , Street Legal, Cage chopped 2 ", Aluminum Diamond Plate Trim, Relocated Factory Bladders with covers, 5 Pt. Harness installed, Bed Tiedown System, Scat Pro-Car Seats, Secondary Battery installed, Oil Pressure, Oil/CVT Temperature, Volt Meter & Water Temp Gauges installed with Dash Plate, Bighorns, ITP Black 212 Wheels. Tonneau cover. 750 Big Bore Kit, Web Cam, and Rocker Arms.

Either - Dick or RD
Fairmont79 is offline  
post #9 of 13 (permalink) Old 10-31-2015, 08:33 AM
Lifetime Member
 
mlh1962's Avatar
 
Join Date: Jul 2011
Location: Lexington, Missouri
Posts: 3,612
 
Garage
Welcome to the forum, my coffee cup is empty I'm going for a refill.

'07 Prowler 650 H1 XT, L.E.D. stop/turn signals, Summit Racing heater, AC winch, AC windshield, soft cab & doors, 6' Eagle Plow, oil gauge, Maxxis MT-762 truck tires, AC Fender Flares, E-Brake alarm, Yutrax UTV Jump Seat, Dynatek CDI
Missouri Mike
mlh1962 is offline  
post #10 of 13 (permalink) Old 10-31-2015, 09:28 AM Thread Starter
Junior Member
 
Join Date: Oct 2015
Posts: 4
 
Yea I've been using dawn and brake cleaner and sandpaper it got it looking like new the first couple times but idk how many more times I can do it Haha and yea it seems I don't have a problem spending money haha
cat king is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Arctic Cat Prowler Forums: Prowler UTV Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome
 


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72