Join Date: Mar 2012
Location: Kingman, AZ 86409
Back at it again, cleaning up several aluminum panels while I have my Prowler down. The range from Heat shields, to headlight mounts. Behind the headrests I mounted two panels for trail permits, registration, etc. etc., Under the lexan Windshield is the aluminum filler panel, I used the stock AC rubber gasket at the bottom, AC plastic vents for air. I only used a shrinker to form the one side of the heat shield, everything else was straight cuts! .060, and .080 aluminum was the sheet I used.
2009 700EFI XTX, , AC Winch, 2010 Dust Shield EPI Sport Utility Clutch Kit , Street Legal, Cage chopped 2 ", Aluminum Diamond Plate Trim, Relocated Factory Bladders with covers, 5 Pt. Harness installed, Bed Tiedown System, Scat Pro-Car Seats, Secondary Battery installed, Oil Pressure, Oil/CVT Temperature, Volt Meter & Water Temp Gauges installed with Dash Plate, Bighorns, ITP Black 212 Wheels. Tonneau cover. 750 Big Bore Kit, Web Cam, and Rocker Arms.
Either - Dick or RD