Help .. need a better memory - Arctic Cat Prowler Forums: Prowler UTV Forum
Prowler Projects Forum Working on a new Prowler project? Post up your worklog here!

Reply
 
LinkBack Thread Tools Display Modes
post #1 of 13 (permalink) Old 07-12-2014, 11:09 AM Thread Starter
Loyal Member
 
GTroyer's Avatar
 
Join Date: Nov 2009
Location: Reno/Sparks ,Nv.
Posts: 3,291
 
Help .. need a better memory

a while back some one mentioned a product that I thought HUMMM .. I need some of that but now CRS has done it's thing yet again ..

IIRC it was a epoxy paste or something like that .. any clues as to what it might be ??

I need to repair the lip of my dually fender where my mud flap attached , I did the lil oops and back to close to something and removed a small 1" piece of the lip and wanted to re-glue it with some type of backing strap epoxy and pop riveted back to a holding strength lip .. it wouldn't be seen unless you were doing a real close inspection as it semi hid under the fender interlinear.

name is Gary or hey you if ya forget

2009 Prowler XTZ , couple things added here and there
'83 CJ7 / SBC + whole lot added here and there
'01 Dodge / Cummins / Dually, a ton of stuff added here and there

INSTRUCTIONS FOR THE NEWBIES ...
1. Bring in a good load of firewood for the pit
2. start the morning coffee , strong but not burnt / boiled down , IMPORTANT start it early as many of us old farts get up early !!
3. sit a spell and swap some lies with the best of us
GTroyer is offline  
Sponsored Links
Advertisement
 
post #2 of 13 (permalink) Old 07-12-2014, 01:02 PM
Lifetime Member
 
mlh1962's Avatar
 
Join Date: Jul 2011
Location: Lexington, Missouri
Posts: 3,624
 
Garage
I had some PC-7 paste I just tried on my bed repair, they make different types. We'll see how it holds up if it doesn't no big deal it was something I had on hand so I thought I would give it a shot. It does say it doesn't work with some plastics.

'07 Prowler 650 H1 XT, L.E.D. stop/turn signals, Summit Racing heater, AC winch, AC windshield, soft cab & doors, 6' Eagle Plow, oil gauge, Maxxis MT-762 truck tires, AC Fender Flares, E-Brake alarm, Yutrax UTV Jump Seat, Dynatek CDI
Missouri Mike
mlh1962 is offline  
post #3 of 13 (permalink) Old 07-12-2014, 02:17 PM
Lifetime Member
 
mlh1962's Avatar
 
Join Date: Jul 2011
Location: Lexington, Missouri
Posts: 3,624
 
Garage
PC Epoxy

'07 Prowler 650 H1 XT, L.E.D. stop/turn signals, Summit Racing heater, AC winch, AC windshield, soft cab & doors, 6' Eagle Plow, oil gauge, Maxxis MT-762 truck tires, AC Fender Flares, E-Brake alarm, Yutrax UTV Jump Seat, Dynatek CDI
Missouri Mike
mlh1962 is offline  
 
post #4 of 13 (permalink) Old 07-13-2014, 10:38 AM Thread Starter
Loyal Member
 
GTroyer's Avatar
 
Join Date: Nov 2009
Location: Reno/Sparks ,Nv.
Posts: 3,291
 
Quote:
Originally Posted by mlh1962 View Post
thanks Mike , I'll find some or e-bay/Amazon it …. it's on Amazon , I'll use my prime to get it

name is Gary or hey you if ya forget

2009 Prowler XTZ , couple things added here and there
'83 CJ7 / SBC + whole lot added here and there
'01 Dodge / Cummins / Dually, a ton of stuff added here and there

INSTRUCTIONS FOR THE NEWBIES ...
1. Bring in a good load of firewood for the pit
2. start the morning coffee , strong but not burnt / boiled down , IMPORTANT start it early as many of us old farts get up early !!
3. sit a spell and swap some lies with the best of us

Last edited by GTroyer; 07-14-2014 at 06:48 PM.
GTroyer is offline  
post #5 of 13 (permalink) Old 07-14-2014, 06:14 PM
Administrator
 
Fairmont79's Avatar
 
Join Date: Mar 2012
Location: Kingman, AZ 86409
Posts: 7,117
 
I use Mar-glass for that type of repair. It is plastic body filler with fiber glass strands. It is very strong.

2009 700EFI XTX, , AC Winch, 2010 Dust Shield EPI Sport Utility Clutch Kit , Street Legal, Cage chopped 2 ", Aluminum Diamond Plate Trim, Relocated Factory Bladders with covers, 5 Pt. Harness installed, Bed Tiedown System, Scat Pro-Car Seats, Secondary Battery installed, Oil Pressure, Oil/CVT Temperature, Volt Meter & Water Temp Gauges installed with Dash Plate, Bighorns, ITP Black 212 Wheels. Tonneau cover. 750 Big Bore Kit, Web Cam, and Rocker Arms.

Either - Dick or RD
Fairmont79 is offline  
post #6 of 13 (permalink) Old 07-14-2014, 06:21 PM
Lifetime Member
 
mlh1962's Avatar
 
Join Date: Jul 2011
Location: Lexington, Missouri
Posts: 3,624
 
Garage
If the stuff I used doesn't hold I'll give it a shot.

'07 Prowler 650 H1 XT, L.E.D. stop/turn signals, Summit Racing heater, AC winch, AC windshield, soft cab & doors, 6' Eagle Plow, oil gauge, Maxxis MT-762 truck tires, AC Fender Flares, E-Brake alarm, Yutrax UTV Jump Seat, Dynatek CDI
Missouri Mike
mlh1962 is offline  
post #7 of 13 (permalink) Old 07-14-2014, 09:11 PM
de3
Loyal Member
 
de3's Avatar
 
Join Date: Mar 2012
Location: parkersburg wva
Posts: 8,040
 
Quote:
Originally Posted by Fairmont79 View Post
I use Mar-glass for that type of repair. It is plastic body filler with fiber glass strands. It is very strong.
RD can you sand that mar- glass

2015 A/C Sport,With a few add ons..........
de3 is offline  
post #8 of 13 (permalink) Old 07-15-2014, 04:01 AM
Lifetime Member
 
muddogefi's Avatar
 
Join Date: Jan 2011
Location: r.i.
Posts: 1,083
 
mar glass is a brand name just like kitty hair,,,very popular with corvette repair,,,,it sands nice and holds great

2012 prowler xtx custom doors ,bumpers ,lightbar,windshield.rollcage ,stereo,5000lb winch,28"wsamp lites ,1 1/2"wheel spacers.custom graphics,custom rear roll bar,factory fender flares cb radio ltz hoodscoop ac soft top and rear window,ac aluminium skidplates,temp and volt guage ,2"lift kit and sti beadlock wheels
muddogefi is offline  
post #9 of 13 (permalink) Old 07-15-2014, 08:13 AM Thread Starter
Loyal Member
 
GTroyer's Avatar
 
Join Date: Nov 2009
Location: Reno/Sparks ,Nv.
Posts: 3,291
 
Quote:
Originally Posted by muddogefi View Post
mar glass is a brand name just like kitty hair,,,very popular with corvette repair,,,,it sands nice and holds great
I'll be looking into one or both of these when I get back from my long trip .. I'm in Coeur 'd Alene right now [northern pan handle of Idaho] cleaning out packing up my shop [it's on the market .. no bites yet ] .. when I'm done here then we hook up the fifth wheel and start the trip , hoping in a couple weeks or so.

THANKS for suggestions guys !!

name is Gary or hey you if ya forget

2009 Prowler XTZ , couple things added here and there
'83 CJ7 / SBC + whole lot added here and there
'01 Dodge / Cummins / Dually, a ton of stuff added here and there

INSTRUCTIONS FOR THE NEWBIES ...
1. Bring in a good load of firewood for the pit
2. start the morning coffee , strong but not burnt / boiled down , IMPORTANT start it early as many of us old farts get up early !!
3. sit a spell and swap some lies with the best of us

Last edited by GTroyer; 07-15-2014 at 08:30 AM.
GTroyer is offline  
post #10 of 13 (permalink) Old 07-15-2014, 06:02 PM
Administrator
 
Fairmont79's Avatar
 
Join Date: Mar 2012
Location: Kingman, AZ 86409
Posts: 7,117
 
I use it for repairing panels, welding parts together, chemical bonding, and so on. Easy to shape, and is very strong. Also somewhat water proof.

2009 700EFI XTX, , AC Winch, 2010 Dust Shield EPI Sport Utility Clutch Kit , Street Legal, Cage chopped 2 ", Aluminum Diamond Plate Trim, Relocated Factory Bladders with covers, 5 Pt. Harness installed, Bed Tiedown System, Scat Pro-Car Seats, Secondary Battery installed, Oil Pressure, Oil/CVT Temperature, Volt Meter & Water Temp Gauges installed with Dash Plate, Bighorns, ITP Black 212 Wheels. Tonneau cover. 750 Big Bore Kit, Web Cam, and Rocker Arms.

Either - Dick or RD
Fairmont79 is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Arctic Cat Prowler Forums: Prowler UTV Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome
 


1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58