Join Date: Mar 2012
Location: Kingman, AZ 86409
Welcome DINO! Best site going for Prowlers! Take the cable off the arm, put the trans in Park and make sure the arm allows the shift arm to line back up. Reinstall and check for proper gear selection. Not sure on the shift pattern, but I think park is the first gear selected. If this fails, double check the gear alignment as they use the same part on the 1000. There are two marks on the gear, one for the 700, and one for the 1000.
2009 700EFI XTX, , AC Winch, 2010 Dust Shield EPI Sport Utility Clutch Kit , Street Legal, Cage chopped 2 ", Aluminum Diamond Plate Trim, Relocated Factory Bladders with covers, 5 Pt. Harness installed, Bed Tiedown System, Scat Pro-Car Seats, Secondary Battery installed, Oil Pressure, Oil/CVT Temperature, Volt Meter & Water Temp Gauges installed with Dash Plate, Bighorns, ITP Black 212 Wheels. Tonneau cover. 750 Big Bore Kit, Web Cam, and Rocker Arms.
Either - Dick or RD