Arctic Cat Prowler Forums banner
1 - 1 of 1 Posts

1 Posts
Discussion Starter · #1 · (Edited)

I'm stuck with this problem. I get spark when cranking until the engine fires and then the spark quits while cranking. That is until I let off the starter button, and then for a split second I get spark again until the engine stops spinning. If I pull the plug out and check it against the crank, it sparks just fine - it's when the engine fires that it goes out.

I've replace the battery, coil, and voltage regulator. It wasn't until I picked up a spark plug tester that I confirmed that it would spark until the engine fired.

My next guess is either the stator or CDI, but don't know if that's even the right direction. Any help or things to try would be greatly appreciated!

UPDATE: stator ohm'd out good. Does anyone know if the CDI could cause this?
1 - 1 of 1 Posts