Arctic Cat Prowler Forums banner

1 - 11 of 11 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter #1
I am new to the forum. I have a 06 650h1 with 6500 miles on it. It has 28" swamplites on it. Took down clutches , rollers on the primary have flat spots on them. And secondary does seem to open up very far. I need some advise.
 

·
Premium Member
Joined
·
8,040 Posts
I am new to the forum. I have a 06 650h1 with 6500 miles on it. It has 28" swamplites on it. Took down clutches , rollers on the primary have flat spots on them. And secondary does seem to open up very far. I need some advise.
I would check your seals,clean it up real good put a new belt on it, put new rollers in it,flat spots are caused from the heat,sounds like it has been a good rig.:)
 

·
Registered
Joined
·
10 Posts
Discussion Starter #5
At 6000 at had to dealer put piston,rings,and head in it . I toasted it after I got dust in carbrator, while clean air filter. My fault. Before that nothing it's been a good machine
 

·
Premium Member
Joined
·
8,040 Posts
At 6000 at had to dealer put piston,rings,and head in it . I toasted it after I got dust in carbrator, while clean air filter. My fault. Before that nothing it's been a good machine
thats great news,how did you get dirt in carb,was the intake tube cracked,:)
 
1 - 11 of 11 Posts
Top