[Trublu269]

Hey guys, recently acquired a 2006 Prowler H1. The starter and Idler #1 were missing, replaced them, and the whole starter clutch system locks up. Its as if the gear on the starter and the #1 idler gear don't mesh correctly. I ordered a 2nd starter to double check and have the same problem. Everything spins freely with the starter removed. The starter also spins when removed. Please help!!

 

[Smitty04]

Just had to replace a pin that broke on starter ring gear. The idler gear that the starter meshes with would spin either way. It is only suppose to spin one direction.

 

[Smitty04]

Mine was the same 2006 650 H1