Arctic Cat Prowler Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
i am new to the forum, I just bought a 2010 prowler 1000 seems to run fine and pull good but once I get to around half throttle there is a terrible noise coming from the clutch area. any ideas on what it could be. when bike is at idle and I can rev it up in neutral there are no noises. thanks for the feedback
 

·
Administrator
Joined
·
7,335 Posts
Welcome to the forum! It Could be the one way bearing, it will require removing the outer, and inner clutch covers, also have to drain the oil as it rides on the wet clutch assembly.
 

·
Premium Member
Joined
·
3,643 Posts
Welcome to the forum
 

·
Registered
Joined
·
3,295 Posts
welcome to the house also , believe you got good advise above also.
 

·
Premium Member
Joined
·
8,040 Posts
Welcome to the best prowler site.....I agree with fairmont79........lets us know what you find out........
 

·
Registered
Joined
·
561 Posts
Wow just look it up. The wild cat does not have one. It's number 27 in parts break down It could also be the bearing in the cover.
 

Attachments

1 - 9 of 9 Posts
Top