Arctic Cat Prowler Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I have a 2012 artic cat 700 hdx. I recently replaced the stator and the shift linkage fell out when pulling the cover off. Lined up the marks on the gears but the shift indicator says its in park but its in neutral. How do i fix this
 

·
Administrator
Joined
·
7,293 Posts
Welcome DINO! Best site going for Prowlers! Take the cable off the arm, put the trans in Park and make sure the arm allows the shift arm to line back up. Reinstall and check for proper gear selection. Not sure on the shift pattern, but I think park is the first gear selected. If this fails, double check the gear alignment as they use the same part on the 1000. There are two marks on the gear, one for the 700, and one for the 1000.
 
1 - 2 of 2 Posts
Top