Arctic Cat Prowler Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
291 Posts
Discussion Starter #1
If anyone who has a 700 xtx and are having trouble with it when getting into water, if it misses and falls on it face after getting wet i have finally found the cure for it. I went riding yesterday and was in water and mud all day and never had one problem with the cat in fact it ran better than it did when it was brand new. If you are having trouble with yours PM me and i will let you know what i did to fix the problem.
 

·
Registered
Joined
·
291 Posts
Discussion Starter #3
It all has to do with the coil. The factory mount when installed will mash the spark plug wire and cause it to not give the plug enough voltage. You will need to get a new coil tun it 180 degrees and shim it out so the plug wire will not come into contact with the mounting plate. You can't use the old coil because you can't get it sealed after it has been mashed against the mounting plate. If you need more information on this problem you can email me at [email protected].
Frank ( aka sneaky snake )
 
1 - 5 of 5 Posts
Top