Arctic Cat Prowler Forums banner
1 - 1 of 30 Posts

· Registered
5 Posts
I too have rear cage and seats and even with the springs adjusted to the stiffest setting I thought the ride was too soft in the back. I took a some 7/8" rubber I acquired from a friend and made spring spacers out of it. So far this helped tremendously. I don't do much extreme riding (tends to spill the cold beer), just mainly trails so I don't know if this would work for everyone. If interested, I cut them with a 3 1/2" hole saw then drilled the center to 1 1/4", sliced and installed them with all weight off the springs.
1 - 1 of 30 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.