[sandchris]

Are you jacking your prowler up to get pressure off of shock?If so dont be afraid to slip a piece of pipe or tubing over your spanner wrench for a little help.Also cheap spring compressor is hose clamps.You might need to use 4-6-8 clamps.Just spread them around the spring and skip a coil if your clamps are big enough.Tighten them evenly and you should be able to reassemble your stock shock.

 

[sandchris]

The 1000 rear shocks are longer.Different mounting location.

Got it all back together, I wish I hadnt paied a mc shop to put the spring together, I used the harbor freight hose clamps I had laying around and didnt think they would survive but they even did both sides! Good tip sandchris! I set them up one click away from stiffest, will see how that goes, always felt a little soft in the rear since I have a 4 seater cage and seat back there.

Are the 1000 shocks compatible for a 650?, I know the 1000 is pretty much a different animal, sure is cool!