Arctic Cat Prowler Forums banner
1 - 14 of 14 Posts

·
Banned
Joined
·
130 Posts
Discussion Starter · #1 ·
If so have you had any problems with axles I have heard of people having axles slip out because of lift kits.
 

·
Registered
Joined
·
85 Posts
I have 6 over long travel. Its also about 4 in lift. No trouble with axles
 

·
Banned
Joined
·
130 Posts
Discussion Starter · #5 ·
that is why you don't have any problems, Gorillas axles are great they are just high.
 

·
Registered
Joined
·
85 Posts
stock axles are week, if you are an aggressiveness driver. Dont know of any lift other than a "bracket lift" that doesnt run aftermarket axles. I have 6" over long travel plus its "cranked up alittle" so stock axles would be 6in short to start with. Also stock axles dont have the range of motion aftermarket axles do, and you need that range of motion with a lift.
 

·
Registered
Joined
·
85 Posts
I couldn't sleep so I did alittle work on prowler....18in clearance in front...16in clearance in center....

 

·
Registered
Joined
·
85 Posts

·
Registered
Joined
·
14 Posts
I have a 2" lift on mine with no trouble. As far as I know, no one has had trouble with axles and a 2" lift on Prowlers.
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top