Arctic Cat Prowler Forums banner
1 - 20 of 22 Posts

· Registered
Joined
·
78 Posts
So, anybody with a stock CDI, I have an experiment for you. I thought I read somewhere that as you hit the rev limiter you can push the reverse override button to go past it.
Anybody ever try this before? I dont have a stock CDI in mine. I was wondering if this worked.
 

· Founding Member
Joined
·
4,157 Posts
Discussion Starter · #10 ·
Did not get a chance to check it out this evening but I will in the morning. From what I read about the one from Hunter works, it improves starting, eliminates the need for override in reverse, gives you another 1k in RPM's. In your opinion was it a good investment?



 

· Founding Member
Joined
·
4,157 Posts
Discussion Starter · #14 ·
ok the results are in. Just took my prowler for a test ride. Running full out as approched the rev limiter I hit the reverse override button. And nothing happened. It may of not worked because my reverse override button has a mind of it's own.



 

· Registered
Joined
·
22 Posts
I have the dynatech from Hunterworks. It runs a lot better in my opinion. Much snappier, better hot starting, no reverse limiter and have hit 57mph on my gps on a long stretch.

p.s. The reverse override trick don't work....tried it before and no worky!
 

· Founding Member
Joined
·
4,157 Posts
Discussion Starter · #16 ·
Cool sounds like Hunter works it the ticket. What makes me wonder is Arctic Cat works with speed wrex and there aftermarket CDI is about $100 more. Is it worth the money???



 

· Registered
Joined
·
22 Posts
Unless they have changed, the one they used to sell was just the ATV CDI which was all the same only with a higher rev-limiter....
 
1 - 20 of 22 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top