Arctic Cat Prowler Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
I have a 2011 Arctic Cat Prowler 700 HDX that I blew a belt on. Can't figure out how to remove drive clutch nut. There is a round factory installed bar on the frame right inline with the nut that will not let me get an impact wrench on it. I don't know how to hold the clutch from turning to loosen the nut. Tried a dealer with no luck, manual didn't help, can't find a video that addressed the problem. Appreciate any help.:)
 

·
Registered
Joined
·
3 Posts
I have a 2008 700 xtx and ran into a similar problem. What I ended up doing was wrapping a strap around the clutch and connecting the hooks to the frame. That way as I turned the nut it tightened the strap and the nut came loose.
 
1 - 2 of 2 Posts
Top