Arctic Cat Prowler Forums banner
1 - 2 of 2 Posts

·
Registered
2019 Prowler Pro XT
Joined
·
43 Posts
Discussion Starter · #1 ·
Bought a 2019 Prowler Pro three weeks ago and like many folks, I searched internet forum for its weak design areas afterwards. One common weak design area is its under box "high heat" temperature area - from its factory engine and muffler location. It gets so hot, its tilt box floor sometimes heat warps upwards. Ouch! I inspected other UTV brands and many of them have a heat shield around their muffler. Its difficult to create / install a heat shield around the Prowler's factory muffler. For my Prowler, I created / installed a simple heat shield (using sheet metal) under its tilt box. Very easy and simple design using self tapping screws into the under box frame bars. And it works great... For visual, see pics... Hope this helps others...
 

Attachments

·
Super Moderator
Joined
·
5,298 Posts
My 2007 Prowler 650 came with a stick-on heat deflector under the bed and a heat shield over part of the muffler. I added one toward the rear using diamond plate.
Automotive tire Bumper Motor vehicle Automotive exterior Wood
Automotive tire Hood Tread Bumper Tire
Automotive tire Motor vehicle Automotive exterior Gas Automotive wheel system
Wheel Automotive tire Tire Motor vehicle Tread
 
  • Like
Reactions: Spike99
1 - 2 of 2 Posts
Top