Arctic Cat Prowler Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hello gang, Recently developed a leak coming from my front diff. area. Its actually leaking out of my 4x4 actuator at the diff. lock pin. Removed and opened up actuator and it was completely full of diff fluid. A little while back machine was stuck in some deep snow at a steep incline for a couple days before i was able to winch it out. Im assuming it is then that the fluid made its way into the actuator. I cleaned up actuator and it is working (saved $500 thankfully), But my question is, Is there some sort of seal in the diff where the actuator pin goes in. The o ring was in good shape and was not where the leak was, in the end of the actuator where the pin slides in and out there was a rubber gasket but i did not see any type of seal that would prevent fluid from running back into the actuator. Any info would be greatly appreciated. SH

2009 arctic cat prowler xtx 700
 
1 - 1 of 1 Posts
Top