Arctic Cat Prowler Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I have a 2012 XTZ1000 that has been throwing a P0635 EPS code on every start. It also is showing 15.1 volts at the battery. I replaced the voltage regulator and installed a new fully charged battery, no change in conditions.
Any ideas?
 

·
Registered
Joined
·
168 Posts
typical the code is low voltage caused by touching the wheel ie using the electric power steering and starting at the same time. Puts a draw on the battery that causes the voltage to dip and sets off a code.

Does the code go away if you turn it off and restart? mine does


15.1 is high but I don't recall what the range is. Mines around 14.5
 

·
Registered
Joined
·
2 Posts
Discussion Starter #4
The code resets after ever key off cycle, but after every key start it comes back on within 30 seconds or so. Do you suppose the voltage readings are normal? I've always been told 14.6v is normal!
 
1 - 4 of 4 Posts
Top