Arctic Cat Prowler Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I'm new here and I just picked a 2007 arctic cat prowler 650 h1 with a new motor. After about a week, I heard chattering coming from the secondary clutch area, but when I put it in reverse, it became louder and it wouldn't go backwards. I removed the clutch cover and noticed the belt had a notch on the top side from hitting the cover. I put in a new secondary spring and primary rollers - no difference. I'm being told to remove the one-way bearing, am I on the right track? I'd appreciate any input...
 
1 - 1 of 1 Posts
Top