Arctic Cat Prowler Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Artic Cat heater installed seems to draw all the engine heat .
This is my virgin post so please bear with me.
Recently had to jump start ,then had the electric wires lengthened from the battery so they were manageable.Called my dog into the cab to help warm it up
But his breath fogged the window in the cab.Still always have starting problems with a first false start then the engine kicks on.Trax great so far.Need spare nuts to replace those that fell off in the cab.Same thing with the brace for the Trax,
Loose nut did it in.No $ help from the dealer in Brandon.Pulled over when riding in town but we were on our way to the outskirts so we were legal ,no RCMP charges,thanks.Tried Klipsch noise canceling headphones in the cab,but they did not work.
 

·
Premium Member
Joined
·
8,040 Posts
welcome,what kind of battery trouble are you having,and yes with a full cab they are noisey inside.what bolts are falling out of cab.what prowler do you have.:)
 

·
Registered
Joined
·
2,681 Posts
Welcome to the forum
 

·
Registered
Joined
·
6 Posts
Discussion Starter #4
Prowler is 2011
Battery P 0635 error always seems to pop up.
Had to jump start the 2011 Prowler due to low battery after the Trax support was installed.
The nuts falling off are from the roof of the cab.
Thanks for your interest.
 

·
Registered
Joined
·
432 Posts
Prowler is 2011
Battery P 0635 error always seems to pop up.
Had to jump start the 2011 Prowler due to low battery after the Trax support was installed.
The nuts falling off are from the roof of the cab.
Thanks for your interest.
Welcome to the forum! I put a drop of blue thread locker on most bolt and nut combinations. A lot of vibration in this type of vehicle.
 

·
Premium Member
Joined
·
3,640 Posts
Artic Cat heater installed seems to draw all the engine heat .
I'm curious about your heater setup since I tried to slap one together from parts off the web. When you say it draws all the heat is your heater blowing hot or warm air?
 

·
Premium Member
Joined
·
8,040 Posts
Prowler is 2011
Battery P 0635 error always seems to pop up.
Had to jump start the 2011 Prowler due to low battery after the Trax support was installed.
The nuts falling off are from the roof of the cab.
Thanks for your interest.
hey john,is that a battery code or power steering code,if it is a power steering code unplug your your power steering and put some di-electric grease on the connection and plug back together.
 

·
Registered
Joined
·
6 Posts
Discussion Starter #8
The new install of the heater required a T hose ,and apparently another hose let go,causing high engine temperature and cool heater temperature,maybe due to an air bubble.
I need things to run properly so today ordered a block heater and a battery trickle charger.
The dealer said this works for most installs as the error message P 0635 can be a power steering error or also a low voltage reading from the battery.
New antifreeze was just added to the Prowler so s.b. good to go when it warms up a bit.
 

·
Premium Member
Joined
·
8,040 Posts
The new install of the heater required a T hose ,and apparently another hose let go,causing high engine temperature and cool heater temperature,maybe due to an air bubble.
I need things to run properly so today ordered a block heater and a battery trickle charger.
The dealer said this works for most installs as the error message P 0635 can be a power steering error or also a low voltage reading from the battery.
New antifreeze was just added to the Prowler so s.b. good to go when it warms up a bit.
keep us updated,but i would try the connection trick,i only got one year out of my battery when it was new.
 
1 - 9 of 9 Posts
Top