Arctic Cat Prowler Forums banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
413 Posts
Discussion Starter #1 (Edited)
I found a Ram Mount bracket that fits the rectangular tubing of the front hoop of the stock factory roll cage. I am finding it very useful for a variety of attaching purposes.

The part number is: RAM-B-259


It fits right over the tubing like it was specifically designed for it. It attaches just like the OEM mirror does. There is a rubber liner that covers the inside rear wall and the wall opposite the set screws. The long black plastic screws are furnished with the part. There is also a very thin strip of metal supplied with this part. I believe it is to be placed under the set screws to prevent damage to the surface odf the tubing it is being attached to (I did not use these). I purchased stainless socket head (1/4-20) screws to replace the furnished screws.


The bottom photo shows just some of the many attachments that can be used with the RAM-B-259







 

·
Premium Member
Joined
·
413 Posts
Discussion Starter #2
 

·
Premium Member
Joined
·
413 Posts
Discussion Starter #3
 
1 - 3 of 3 Posts
Top