Arctic Cat Prowler Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #1
how do you guys get the springs off the shocks? been to 3 parts stores and they dont have one small enough. thanks
 

·
Registered
Joined
·
166 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #3
thanks I just ordered a smaller atv one from jc whitney.
 

·
Registered
Joined
·
94 Posts

·
Registered
Joined
·
27 Posts
Discussion Starter #6
Im puttin the QA1-14-300 on the rear. should I put the stk rears on the front? or will they lift the front? just wanted to get rid of the squat look. thanks
 

·
Registered
Joined
·
3,295 Posts
just chuck them SOB's up in the vise and use a spanner wrench , back off the preload nut and it will be free after about 10 turns .. didn't need a spring compressor of any type [would have been a lil easier but wd40 to clean the threads before and armstrong preload nut spanner and good to go LOL

BTW I used 350 lb springs and like the results
 

·
Registered
Joined
·
244 Posts
I have a 2010 xtz and ordered QA1 14x350 from summit no problems.I moved the back springs to the front it give great ride and no more sagging. I also have made a rear seat and cage on mine and with 5 adults I have no problem.....I have pics posted on my profile.I used my snowmobile spring compressor
 
1 - 9 of 9 Posts
Top