Street legal upgrade kit ????

FYI share - if others plan to-do the same...

After a "good night's sleep" I decided to upgrade my DIY simple Street Lighting kit with 4-Way Emergency Flasher ability. For this task, I previously bought a 4-way flasher rocker switch, 1 x LED Flasher module and some 12V 1A mini-diodes (that fit inside auto fuse holders). Since LED light use very little Amps, I'm hoping 1A diodes will work properly. I'm now currently waiting for the 1A mini-diodes to arrive (which can take up to 2 months in my remote north region). For simple wiring diagram, see attachment. More to come / more to share - as I slowly receive needed parts.

Update:

After another "good night's sleep" and more online research, I decided NOT to use 2 x 1A Diodes. Yes, 1A will most likely work properly. However, some Electronic Specialists advise NOT to exceed 80% of diode's sizing number. Thus, I decided to use 2 x 3A (for reality max 2.5A each) size instead. See pic for visual. Currently waiting for these parts to arrive in my north region....

Update:

Today, I received previously ordered 20 x 3A diodes / pn: 1N5400 (from Amazon) and installed them. I could have also used 6A for < 50V rated diodes as well. For 12V LED lights, 3A for < 50V (pn: 1N5400 ) works great. My Prowler's new 4-way flasher now works properly (properly with its Left and Right flasher switch using same LED bulbs).

For folks who might do the same 4-Way flasher install (on their UTV, ATV or other 12V system), see below details.

Like they say, "the magic is in the Diodes" (to stop DC current back feeding). smiles.

Hope this helps