Arctic Cat Prowler Forums banner

1 - 13 of 13 Posts

·
Registered
Joined
·
105 Posts
Discussion Starter #1
Could someone provide me with a procedure to program the tachometer and clock? I have no problem to change between km, rpm or mph, but have a problem setting the time, especially the hour and the miles on the odometer. There seem to be different numbers, T1, T2
Your help would be appreciated.
 

·
Premium Member
Joined
·
8,040 Posts
Could someone provide me with a procedure to program the tachometer and clock? I have no problem to change between km, rpm or mph, but have a problem setting the time, especially the hour and the miles on the odometer. There seem to be different numbers, T1, T2
Your help would be appreciated.
Don't feel bad buddy I have had mine for seven years and still have trouble,I can tell you right off the bottom button changes the tach to the speedo.do you have a manual.I just have to play with mine for a while.......
 

·
Premium Member
Joined
·
3,640 Posts
The T1 & T2 are trip meters just like you have in your car. I'll try to look up some info on setting the clock.
 

·
Premium Member
Joined
·
3,640 Posts
1. Clock/Engine Hour Meter - The clock function
indicates time in the 12 hour mode; the hour
meter indicates the total time the vehicle has run
and cannot be reset to zero. To set the clock, use
the following procedure.​

A.With the ignition switch in the ON position,
press and release the Mode Button (3) until
the Clock/Engine Hour Meter (1) is displayed;
then (if necessary) press and release
the Set/Reset Button (4) to the clock display.​

B. Press and hold the Set/Reset Button (4) until
the minutes stop scrolling and the hour display
starts to scroll. Momentarily release
when the correct hour is displayed; then
repeatedly press and release the Set/Reset
Button (4) until the correct minutes are displayed.​

􀂄 NOTE: Approximately two seconds after releasing
either Button, the LCD will return to normal
operation.
Capture.JPG
 
  • Like
Reactions: de3

·
Premium Member
Joined
·
3,640 Posts
5. Odometer/Trip Meter (#1 and #2) - Odometer
registers the total distance the vehicle has traveled.
Trip meters can register two distances (for
instance, #1 could register trip distance and #2
could register distance between stops). The trip
meters can be reset while the odometer only registers
accumulated miles/kilometers.​

􀂄 NOTE: To select the odometer (ODO), trip #1
(T1), or trip #2 (T2), press the Mode Button (3) to
select the distance mode; then press the Set/Reset
Button (4) to select the desired display. Hold the
Set/Reset button down to reset trip meters.
 

·
Premium Member
Joined
·
8,040 Posts
Very good info mike,I never did figure it out 100%,I always just set the clock,and mostly run it on tach.:)
 

·
Administrator
Joined
·
7,279 Posts
Thank God for Members & Manuals!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Good info
 

·
Premium Member
Joined
·
8,040 Posts
Thank God for Members & Manuals!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!Good info
RD, I still have to get my manual out when I go to set the time,after 7 years you would think I would have it ironed out.:eek:
 

·
Registered
Joined
·
105 Posts
Discussion Starter #9
Thank you friends, I'll copy the info. for future reference and 'll set the unit. I hope you didn't mind such simple question on a 5-year old vehicle with it's second engine. The issues I had to deal with were generally on a higher priority. This question indicates that I'm running out of problems...Cheers!
 

·
Premium Member
Joined
·
8,040 Posts
Thank you friends, I'll copy the info. for future reference and 'll set the unit. I hope you didn't mind such simple question on a 5-year old vehicle with it's second engine. The issues I had to deal with were generally on a higher priority. This question indicates that I'm running out of problems...Cheers!
No problem manfred,were here to help each other out.
 

·
Administrator
Joined
·
7,279 Posts
At times even the manual confuses me LOL!!!!!!!!!!!!!!!!!!!!!!!!!!!RD
 

·
Premium Member
Joined
·
8,040 Posts
At times even the manual confuses me LOL!!!!!!!!!!!!!!!!!!!!!!!!!!!RD
I know what you mean,my gauge has a oil icon that shows up when you turn the key on the manual don't say nothing about it.:confused:
 

·
Premium Member
Joined
·
3,640 Posts
Could someone provide me with a procedure to program the tachometer and clock? I have no problem to change between km, rpm or mph, but have a problem setting the time, especially the hour and the miles on the odometer. There seem to be different numbers, T1, T2
Your help would be appreciated.
Manfred if you need a repair manual you can download one free at the link below. It's what I have and where I copied the instructions from.

"K&T Parts House Lawn Mower Parts and Chain Saw & Trimmer Parts"
 
1 - 13 of 13 Posts
Top