Arctic Cat Prowler Forums banner
21 - 21 of 21 Posts
Discussion starter · #21 ·
Finally this weekend I had time to put the new springs on the prowler. Removing the old springs was rather easy using 2 ratchet straps. Using the existing parts I made new spring mounts, basically circular disc with a short piece of tubing to hold the spring in place, to support the larger diameter springs. I used a plasma cutter to cut out the discs in 3/16" plate steel. It was a little PITA to compress the new springs to fit on the shocks. Ended up using 3 ratchet straps to compress the spring. The end result is what I wanted, the prowler sits level now and is capable of supporting of full load without bottoming out. I used the 350lb springs and with just two people in the prowler it is a little stiff but loaded down it rides like before. For $86 I now have a the correct springs in the prowler. I would definitely recommend this for anyone on a budget.
 
21 - 21 of 21 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top