Arctic Cat Prowler Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I’m replacing a winch and my son in law removed the old solenoid wiring and now I don’t know how to rewire the new one. I have all wires figured out on the new winch and solenoid except for there was a orange and black wire near the solenoid that I followed to the wiring harness that goes up to ignition I think. When I put the orange on the red post and the black on the black post on the solenoid the fan came on with the key off. I removed the orange and black wire and the winch still does not work, shorts out. Anyone know what the orange and black wire is for? It has post connectors on the end of the wires. All the videos I see online show to tap into a wire that is fed off the ignition. If the orange is the correct one, than why do I have a black and where does it go?
 
1 - 1 of 1 Posts
Top