Arctic Cat Prowler Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
149 Posts
Discussion Starter #1
Since I didn't get a manual for the XTZ can someone give me a quick rundown? What oil should I use? How much? Cross reference on filters or should I only use an AC filter?

Also, when will they have XTZ manuals?
 

·
Premium Member
Joined
·
1,603 Posts
I will see if I have this exact specs anywhere. I am sure the Vendors are just getting back to work today. Hopefully someone will know the oil change info?
 

·
Registered
Joined
·
140 Posts
I think it is 2.96 quarts. Use the AC synthetic oil and filter. Rember the most important thing is to only fill your oil to the lowest line on the dipstick. If you put 2.96 quarts in your motor when you change the oil there will be too much. You will probably overheat like I did. I would say about 2.5 quarts or so is what you will be putting in. The oil cooler and system holds some oil when you drain the rest. Keep that in mind when you do yours. I wish I had known before I did mine the first time................
 

·
Registered
Joined
·
155 Posts
does this also apply for the xtx, or is there even an oil cooler on the xtx? ...sorry, will be my first cat,getting one this week and need as much info as possible! thanks,
 

·
Registered
Joined
·
438 Posts
sorry I dont know how much oil they hold but I think we have filters instock at the shop I ordered some for me and the shop and we have belts....
 

·
Registered
Joined
·
122 Posts
Dentless is correct. It will take about 2.5qt to fill but make sure it only registers at the first marks of your stick!!
 
1 - 7 of 7 Posts
Top